Home / Developers / foundryequipments

Developer Profile

foundryequipments

Discovered public repositories for foundryequipments in the GitHub catalog.

↗

foundryequipments/Hopper-Grill

Hopper Grill ELECTRO FLUX Grate Magnets provide a high intensity high gradient magnetic field to remove ferrous metals from free-flowing materials. Grate Magnets are available in round, square, and rectangular shapes as per your requirement. It is used in or below hoppers, in closed chutes, floor openings, catch bins, and other locations to protect processing equipment and insure product purity. These grids encased totally in stainless steel. For higher level of protection, double and triple banked grids can be used. All grids are available with either ferrite or powerful rare earth magnets.

↗

foundryequipments/Drawer-in-Housing

Drawer in Housing ELECTRO FLUX Grate Magnets provide a high intensity high gradient magnetic field to remove ferrous metals from free-flowing materials. Grate Magnets are available in round, square, and rectangular shapes as per your requirement. It is used in or below hoppers, in closed chutes, floor openings, catch bins, and other locations to protect processing equipment and insure product purity. These grids encased totally in stainless steel. For higher level of protection, double and triple banked grids can be used. All grids are available with either ferrite or powerful rare earth magnets. ELECTRO FLUX Magnetic Grates in housing effectively remove ferrous fragments and fines from free-flowing material. Housings are constructed of 12 gauges mild or stainless steel. Inside the housing are two or more high intensity Magnetic Grates In Frames. Cleaning of the magnets is easily accomplished by removing the cover plate of the housing and sliding out each magnet assembly.

↗

foundryequipments/Magnetic-Grill

Magnetic Grill ELECTRO FLUX Magnetic Grill provide a high intensity high gradient magnetic field to remove ferrous metals from free-flowing materials. Grate Magnets are available in round, square, and rectangular shapes as per your requirement. It is used in or below hoppers, in closed chutes, floor openings, catch bins, and other locations to protect processing equipment and insure product purity. These grids encased totally in stainless steel. For higher level of protection, double and triple banked grids can be used. All grids are available with either ferrite or powerful rare earth magnets.

↗

foundryequipments/Suspension-Permanent-Magnet

ELECTRO FLUX Suspension Magnets are designed for installation over conveyors where tramp iron contamination exists and needs to be removed for protection of subsequent processing machinery or providing cleaner product. Just suspend the magnet over the conveyor or over the head pulley. When the magnet surface starts to fill up, swing the magnet away from the conveyor and use the convenient wiper arm (permanent magnet) to release the attracted metal. Operating heights up to 15 mm to 500 mm are available. Manually cleaned magnets can be supplied with a stripper mechanism. No power consumption, virtually maintenance free. Advantages of Permanent Suspension Magnets: No need of power supply No breakdown No maintenance

↗

foundryequipments/Suspension-Electro-Magnet

ELECTRO FLUX Suspension Magnets are designed for installation over conveyors where tramp iron contamination exists and needs to be removed for protection of subsequent processing machinery or providing cleaner product. Just suspend the magnet over the conveyor or over the head pulley. When the magnet surface starts to fill up, swing the magnet away from the conveyor and cut the power (electromagnet) to release the attracted metal. Electro Suspension Magnet consisting of aluminum or copper wound coils immersed in a transformer oil (for prevention of overheating or shorting) or air-cooled for extreme or dusty environments.All electro suspension magnet comes along with control panel. Operating heights up to 150 mm to 450 mm are available. Manually cleaned magnets can be supplied with a stripper mechanism. No power consumption, virtually maintenance free.

↗

foundryequipments/Suspension-Magnet

Suspension Electro Magnet ELECTRO FLUX Suspension Magnets are designed for installation over conveyors where tramp iron contamination exists and needs to be removed for protection of subsequent processing machinery or providing cleaner product. Just suspend the magnet over the conveyor or over the head pulley. When the magnet surface starts to fill up, swing the magnet away from the conveyor and cut the power (electromagnet) to release the attracted metal. Electro Suspension Magnet consisting of aluminum or copper wound coils immersed in a transformer oil (for prevention of overheating or shorting) or air-cooled for extreme or dusty environments.All electro suspension magnet comes along with control panel. Operating heights up to 150 mm to 450 mm are available. Manually cleaned magnets can be supplied with a stripper mechanism. No power consumption, virtually maintenance free.

↗

foundryequipments/Excavator-Magnet

Excavator Excavator Magnet gives the crane operator completes control of the magnet in various positions, permitting the crane operator to incline or tilt the magnet. The mounting fixture for an electromagnet is further permits the excavator operator to operate the Excavator Magnet more efficiently by preventing the magnet from swinging freely at the end of the lift crane boom. The mounting fixture for an Excavator Magnet is also permits the crane operator to apply a compressive force to the electromagnet to compress the material to be picked up by the magnet. Excavator operator to operate the Excavator Magnet more efficiently by picking up more material, and to load a truck or container with higher density material, Furthermore, the ability of the excavator operator to incline or tilt the Excavator Magnet in accordance with the higher Excavator Magnet to reach material from hard-to-reach corners or angles, thereby making the Excavator Magnet much more effective.

↗

foundryequipments/Rectangular-Lifting-Magnet

Electro Flux Rectangular Lifting Magnet mainly used to lift heavy sheets, plates, Rounds or Square bars, bundles, billets, ingots and many similar applications, in shipyards, steel mills and foundries. the magnet makes direct contact with the surface, as a gap of as little as 1 mm can cause a 50% reduction in lifting capacity.

↗

foundryequipments/Circular-Lifting-Magnet

ELECTRO FLUX Circular Lifting Magnet can handle tones of scrap continuously throughout the day. It is used in metalworking plants to hoist and transport steel parts, forgings, casting, plates, booms, channels, angles, rods and bars. They save time and effort because they can lift steel more quickly and conveniently than any other mechanical device. ELECTRO FLUX Scrap Lifting Magnets feature the highest lifting capacity. It can handle tonnes of scrap continuously throughout the day. It is used in metalworking plants to hoist and transport steel parts, forgings, casting, plates, booms, channels, angles, rods and bars. They save time and effort because they can lift steel more quickly and conveniently than any other mechanical device. With a lifting magnet there is no need to attach and secure lifting supports and nor is it necessary to block up loads on the floor or to move for mechanical devices. Applications Applied to lifting and transporting magnet-conductive materials such as steels and irons in metallurgy industry ,mine industry,machinery industry and transportation industry and etc. Features Rugged-all-welded construction with good moisture-proofing strong attraction force and low energy consumption. The energizing coils are designed to improve the electrical property and mechanical property of the energizing coils. Heat-resistant grade of insulating material reaches Grade C with long service life. Simple and convenient installation,operation and maintenance.

↗

foundryequipments/Magnetic-Floor-Sweeper

Electro Flux Magnetic floor sweepers are well built and incredibly strong with powerful magnetism. These sweepers perfect for clearing metal debris from walkways, garages and yards. Reduce the possibility of costly flat tires or personal injury, and decrease the time needed to clean up scattered ferrous metal material.

↗

foundryequipments/Plate-and-Hump-Magnet

Plate Magnet ELECTRO FLUX Plate Magnet,Permanent Plate Magnets are Suspended over your flow, chutes, ducts or located directly in the flow line, plate magnets produce a strong magnetic field separating tramp iron from your dry flow, maintaining product quality. It is used for excellent magnetic separation for removing small tramp iron such as nuts, bolts, etc. In certain cases, such as removing fine iron from powders, rare earth magnetic is required. These magnets are maintenance free, easily installed and not affected by wet conditions Hump Magnet ELECTRO FLUX Hump Magnet is an in-line magnet for extracting ferrous metals from pneumatic conveyor systems and chutes. The hump contains two powerful magnetic plates positioned at right angles to each other. Materials passing through the chute system are evenly distributed through the hump and across the magnets with little turbulence and no blockage. Any unwanted ferrous metals within these materials will be automatically extracted.

↗

foundryequipments/Liquid-Line-Separator

ELECTRO FLUX Liquid Line Separator,Pipeline Magnet (Liquid Line Separator) is designed to attract of fine ferrous particles such as rust from fluids flows in pipeline with no appreciable pressure drop or reduction in flow rates. Material of construction is 304 or 316 stainless steel; the unit is simply connected to the existing pipeline via flanged or threaded ends. Liquid Traps may be installed horizontally, vertically, or on an angle without affecting their magnetic efficiency. Magnetic Grill filters the flow and extracts the unwanted ferrous metal. Simple and easy access is possible using the quick release lid.

↗

foundryequipments/Magnetic-Roll-Separator

Electro Flux Magnetic Roll Separator Is used to remove fine iron contamination from the products such as Silica sand, quartz, magnesite, feldspar, dolomite, food products, chemicals, ceramics, etc. Magnetic Separator consist of Hopper, Electro magnetic Feeder with Dimmer control, Roll Construction, Drive Motor, Adjustable Splitter Plates, Control Panel. Rare earth roll separator has a powerful rare earth magnetic roll, which also functions as a head pulley. As the product on the belt passes over the rare-earth magnetic roll, Ferrous particles stick to the belt while the non-ferrous particles fall freely off the belt into the non-magnetic chute due to centrifugal force. Adjustable splitters are provided to ensure an optimum magnetic /non-magnetic split. Roll speed is variable and can be adjusted from 40 RPM to 400 RPM thereby enabling the aid of centrifugal force in separation of the magnetic and non-magnetic. Feed Hopper: Non-magnetic stainless steel construction, finely controlled adjustable feed gate with positive shut off designed for uniform feed with minimum bounce. Roll Construction: The magnetic rolls incorporated in our machines have been specially designed and developed to generate exceptionally high magnetic field and gradient. The rolls which are built using rare earth Nd-Fe-B are manufactured to very low dimensional tolerances. Roll Construction: The magnetic rolls incorporated in our machines have been specially designed and developed to generate exceptionally high magnetic field and gradient. The rolls which are built using rare earth Nd-Fe-B are manufactured to very low dimensional tolerances. Drive Motor: Can be constant or variable speed according to the capacity and the range of separation. Adjustable Splitter Plates: In stainless steel normally consist of a single splitter, however in certain cases splitter plates can be fitted with provision for middlings product for different modes of treatment.

↗

foundryequipments/Magnetic-Drum-Separator

ELECTRO FLUX Magnetic drum separators offer the highest level of magnetic strength and are appropriate for many different applications, including scrap processing, auto shredding, mining, aggregate, or anywhere large volumes of metal need to be removed The concept of Magnetic Drum Separator is very simple - material is fed to a rotating shell revolving around a stationary magnet. Ferrous metal remains on the shell surface until it passes from the magnetic field - separating it from the normal trajectory of the nonferrous material. The design of the Drum Separator features a continuously self-cleaning magnet, which can be provided as the drum only or as a complete assembly with the housing & drive included. Material to be processed enters the top of the drumseparator and flows across the surface of the drum. As the drum shell rotates around the stationary magnetic field, all Non ferrous product which is unaffected by the magnet falls free from the drum into the cleaned material flow. Any ferrous tramp metal is captured by the magnetic field and held on the drum’s surface. As the drum rotates, the metal is carried past the diverter and released outside of the magnetic field.

↗

foundryequipments/Magnetic-Head-Pulley

ELECTRO FLUX Magnetic Head Pulley Provide contentious protection against tramp iron contamination of both large and fine iron particles. As product passes over the head pulley, non-ferrous material is discharged in a normal trajectory. Ferrous metal is attracted to the Magnetic Head Pulley and remains on the belt until the belt moves away from the pulley falling clear of the product stream. The separation is automatic and continuous. Widely used in Recycling/Processing of aluminum, plastic, glass, wood, and other non-ferrous materials flows including Chemicals, food, grains, textile, ceramic and coal. Metal recovery/separation of screws, nails, fasteners, blanks, wire, chain, tools and various ferrous objects from your product flows. Applications: Tramp Metal Removal from Conveyor Systems, Purification and Concentration of Ores, Chemicals and Granular Products. Features: Efficient, cost-saving recovery of harmful tramp metal; Super-tough, trouble-free operation

↗

foundryequipments/Over-Band-Magnetic-Seperator

Electro Flux Over Band Magnetic Seperator are designed for installation over conveyors where tramp iron contamination exists and needs to be removed for protection of subsequent processing machinery or providing cleaner product. The self-cleaning type uses a two-pulley design. Parallel self-cleaning magnets are mounted in line with the material flow, while transverse self-cleaning magnets remove the ferrous materials over the side of the conveyor. ELECTRO FLUX Over Band Magnetic Seperator is available in permanent Magnet and Electro Magnet. Over Band Magnetic Seperator consist of a stationary tri-polar design magnet unit, with coils wound in aluminum wire or foil (copper available as an option) dependent on size, and insulated to Class ‘H’ (or above) temperature specification to receive DC power supply. Magnets can be air or oil cooled, whichever is more suitable for the application. Oil cooled magnets are fitted with expansion tanks to ensure the coil is always immersed in oil. Cross Belt & Inline Over Belt Separators Cross belt Suspended Separator magnets provide a true self cleaning industrial magnetic separator systems solution, for continuous metal recovery from your conveyed materials. Ferrous metals are magnetically pulled out of your non-ferrous conveyed materials; ferrous materials collect on the self cleaning magnetic separator belt and are conveyed and discharged to your hopper. ELECTRO FLUX Over Band Magnetic Seperator type uses a two-pulley design. self-cleaning magnets are mounted in line with the material flow, while cross belt self-cleaning magnets remove the ferrous materials over the side of the conveyor. Self Cleaning Components Shaft mounted speed reducer PMDC motor Heavy cleated rubber belt Self-aligning sealed bearings Four point suspension Rugged structural steel frame

↗

foundryequipments/Permanent-Lifting-Magnet

Electro Flux Permanent Lifting Magnets are suitable for all lifting operations in the modern workshop and for steel plates, sheets and blocks or steel rounds and tubes can be easily lifted. It is permanent magnetic technology that needs no electrical connection.

↗

foundryequipments/EOT-Crane-Magnet

EOT Crane Magnet designed and manufactured by M/S Electro Flux Equipments Pvt Ltd., Chennai India. EOT Crane Magnet fitted in J C P, HITACHI or in cranes used to lift metal scraps, MS plates and ferrous materials loading, unloading and material handling purpose. easy cost effective way of material handling in open EOT Crane Magnet. power source: generators/ alternators (fixed in crane).

↗